MA000071 PR718889 |
FAIR WORK COMMISSION |
DETERMINATION |
Fair Work Act 2009
s.285—Annual wage review
Annual Wage Review 2019–20
(C2020/1)
TIMBER INDUSTRY AWARD 2010
[MA000071]
Timber and paper products industry | |
JUSTICE ROSS, PRESIDENT |
MELBOURNE, 26 JUNE 2020 |
Annual Wage Review 2019–20.
A. Further to the decision issued by the majority of the Expert Panel in the Annual Wage Review 2019–20 on 19 June 2020 [[2020] FWCFB 3500], the above award is varied as follows:
1. By deleting the table appearing in clause 17.1 and inserting the following:
Skill level |
Minimum weekly wage |
Minimum hourly wage |
|
$ |
$ |
Level 1 |
753.80 |
19.84 |
Level 2 |
775.40 |
20.41 |
Level 3 |
805.10 |
21.19 |
Level 4 |
832.80 |
21.92 |
Level 5 |
877.60 |
23.09 |
Level 6 |
905.10 |
23.82 |
Level 7 |
957.60 |
25.20 |
2. By deleting the table appearing in clause 17.2 and inserting the following:
Skill level |
Minimum weekly wage |
Minimum hourly rate |
|
$ |
$ |
Level 1 |
753.80 |
19.84 |
Level 2 |
775.40 |
20.41 |
Level 3 |
805.10 |
21.19 |
Level 4 |
832.80 |
21.92 |
Level 4A |
846.90 |
22.29 |
Level 5 |
877.60 |
23.09 |
Level 6 |
905.10 |
23.82 |
Level 7 |
957.60 |
25.20 |
3. By deleting the table appearing in clause 17.3 and inserting the following:
Skill level |
Minimum weekly wage |
Minimum hourly rate |
|
$ |
$ |
Level 1 |
792.20 |
20.85 |
Level 2 |
819.60 |
21.57 |
Level 3 |
836.30 |
22.01 |
Level 4 |
852.60 |
22.44 |
Level 5 |
877.60 |
23.09 |
Level 6 |
905.10 |
23.82 |
Level 7 |
932.60 |
24.54 |
Level 8 |
957.60 |
25.20 |
Level 9 |
985.00 |
25.92 |
4. By deleting the words “1 July 2019” in clause 20.2 and inserting “1 November 2020”.
5. By deleting the table appearing in clause E.1.3 and inserting the following:
Coup Assessment |
Sawlog |
Sawlog |
Mixed |
-85 |
-56 |
-56 Non-Con |
$/m3 |
$/t |
$/t |
$/t |
$/t |
$/t | |
A1 |
4.61 |
4.15 |
3.07 |
3.44 |
3.81 |
4.58 |
A2 |
4.79 |
4.34 |
3.40 |
3.61 |
3.98 |
4.76 |
A3 |
4.97 |
4.52 |
3.38 |
3.77 |
4.14 |
4.96 |
A4 |
5.38 |
4.89 |
3.61 |
4.01 |
4.48 |
5.37 |
B1 |
4.97 |
4.52 |
3.39 |
3.77 |
4.15 |
4.96 |
B2 |
5.21 |
4.73 |
3.47 |
3.94 |
4.34 |
5.19 |
B3 |
5.43 |
4.91 |
3.64 |
4.05 |
4.52 |
5.40 |
B4 |
5.82 |
5.36 |
3.96 |
4.38 |
4.89 |
5.82 |
C1 |
5.38 |
4.90 |
3.62 |
4.05 |
4.48 |
5.38 |
C2 |
5.63 |
5.13 |
3.79 |
4.28 |
4.73 |
5.59 |
C3 |
5.82 |
5.36 |
3.96 |
4.38 |
4.89 |
5.82 |
C4 |
6.30 |
5.74 |
4.28 |
4.76 |
5.28 |
6.30 |
Landing |
1.29 |
1.15 |
0.98 |
0.98 |
1.05 |
1.29 |
6. By deleting the table appearing in clause E.1.4 and inserting the following:
Conventional |
Non-conventional | ||||||
Coup Assessment |
Sawlog |
Sawlog |
Mixed |
-85 |
Mixed |
-85 |
-40 |
$/m3 |
$/t |
$/t |
$/t |
$/t |
$/t |
$/t | |
A1 |
4.61 |
4.15 |
3.07 |
3.44 |
3.26 |
3.61 |
5.36 |
A2 |
4.79 |
4.34 |
3.40 |
3.61 |
3.40 |
3.77 |
5.56 |
A3 |
4.96 |
4.52 |
3.38 |
3.62 |
3.48 |
3.93 |
5.78 |
A4 |
5.38 |
4.89 |
3.61 |
4.01 |
3.80 |
4.28 |
6.15 |
B1 |
4.97 |
4.52 |
3.39 |
3.77 |
3.48 |
3.96 |
5.78 |
B2 |
5.21 |
4.73 |
3.47 |
3.94 |
3.68 |
4.05 |
6.01 |
B3 |
5.43 |
4.91 |
3.64 |
4.05 |
3.81 |
4.28 |
6.30 |
B4 |
5.82 |
5.36 |
3.96 |
4.38 |
4.10 |
4.60 |
6.76 |
C1 |
5.38 |
4.90 |
3.62 |
4.05 |
3.80 |
4.28 |
6.22 |
C2 |
5.62 |
5.13 |
3.79 |
4.28 |
3.98 |
4.38 |
6.52 |
C3 |
5.82 |
5.36 |
3.96 |
4.38 |
4.15 |
4.67 |
6.77 |
C4 |
6.33 |
5.74 |
4.28 |
4.76 |
4.43 |
4.96 |
7.35 |
Landing |
1.29 |
1.15 |
0.98 |
0.98 |
0.98 |
0.98 |
1.48 |
7. By deleting the table appearing in clause E.1.5 and inserting the following:
Manual |
Pulp |
Pulp |
Short |
Short |
Short |
Short |
Long |
Long | |
T1R3 |
wood |
wood |
s/log |
s/log |
peelers |
peelers |
s/log |
s/log | |
$T25 |
(+1.5) |
(-1.5) |
(+1.5) |
(-1.5) |
(+1.5) |
(-1.5) |
(+1.5) |
(-1.5) | |
$/t |
$/t |
$/t |
$/t |
$/t |
$/t |
$/t |
$/t |
$/t | |
Falling |
|||||||||
A |
16.17 |
7.24 |
8.34 |
8.77 |
9.86 |
8.92 |
10.06 |
7.76 |
8.88 |
B |
16.66 |
7.49 |
8.87 |
8.97 |
10.42 |
9.21 |
8.39 |
8.01 |
9.39 |
C |
17.07 |
7.84 |
9.19 |
9.37 |
10.73 |
9.54 |
10.89 |
8.35 |
9.73 |
8. By deleting the table appearing in clause E.1.6 and inserting the following:
Stump diameter (where cut) |
Payment per tree |
$ | |
0–25 cm |
1.07 |
26–50 cm |
2.22 |
51–75 cm |
3.33 |
76–100 cm |
4.40 |
101–150 cm |
11.05 |
151–200 cm |
15.48 |
over 200 cm |
17.72 |
B. This determination comes into operation on 1 November 2020. In accordance with s.286(5) of the Fair Work Act 2009 this determination does not take effect in relation to a particular employee until the start of the employee’s first full pay period that starts on or after 1 November 2020.
PRESIDENT
Printed by authority of the Commonwealth Government Printer